iOS App Extension Setup for the Beam Eye Tracker
iOS App Extension Setup for the Beam Eye Tracker
Turn your iPhone/iPad into an eye tracker with the Beam Eye Tracker iOS app
- PC with Windows 10 (or later)
- iPhone or iPad that supports Face ID and iOS 13 (or later)
1
Download the Beam Eye Tracker iOS app from the app store.
During installation, enter your email to receive the PC software installer link or use the link in step 2.
2
Get access to the Beam Eye Tracker here. A free demo is available on Steam.
Download and install following the instructions.
Note: If the Eyeware Beam icon doesn’t appear on your desktop, check the system tray (bottom-right corner) for the purple logo. You can then drag and pin it to your taskbar for easy access.
4
Specify how you want to connect to the iOS device running the Beam Eye Tracker iOS app.
Personal Hotspot
Use your iOS device’s Personal Hotspot feature to create a local network and connect your PC to it. Works wireless or wired (preferred), if you connect your device to the PC over USB. Data charges may apply if your PC access the internet.
IP Address Input
Manually connect to your iOS device by entering its IP address. Your device and PC must be on the same local area network. The IP address is displayed on your Beam Eye Tracker iOS app main screen. Look for “My IP is: XXX.XXX.X.X”.
5
Select Streaming on the Beam Eye Tracker iOS app before connecting.
Click on Save & Connect and allow a moment for the new settings to load.
The Save & Connect button will change to Preview Video.
Troubleshooting: If the connection wasn’t established, please revisit the previous step.
6
Position your iPhone/iPad in landscape mode facing you, with the selfie camera to the right, either below or above the monitor.
Align the camera with the center of the monitor, not the device itself.
Don’t worry if it’s not perfectly centered as calibration will compensate for that.
You can click on Preview Video button that appeared in the previous step verify if your face and eyes are visible to the camera.